Lincoln 2009 MKZ User Manual download pdf (Page 50)

Replacing backup lamp/redundant tail lamp bulbs

The backup lamp and redundant tail lamp bulbs are located in the trunk

lid. Follow the same steps to replace either bulb.

1. Make sure the headlamp switch is

in the off position and open trunk to

access the lamp assembly.

2. Position the decklid trim aside by

removing 3 to 4 pin-type retainers

to expose the lamp assembly.

3. Remove the bulb socket by

rotating it counterclockwise, then

pulling it out of the lamp assembly.

4. Pull the bulb from the socket and

push in the new bulb.

5. Install the bulb socket into the

lamp assembly by rotating it

clockwise.

6. Carefully reposition the trim back

to its original position and secure

the retainers.

Replacing high-mount brake lamp bulb

1. Make sure the ignition control is

in the off position.

2. Open the trunk and reach

underneath package tray to locate

lamp assembly.

3. Remove the bulb socket by

rotating it counterclockwise, then

pulling it out of the lamp assembly.

4. Pull the bulb straight from the

socket and push in the new bulb.

5. Install the bulb socket into the lamp assembly by rotating it clockwise.

2009 MKZ (378)

Owners Guide

USA (fus)

Lights

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 291 292

No comments

Lincoln 2009 MKZ User Manual Page 50