Lincoln 2009 MKZ User Manual download pdf (Page 275)

POWER STEERING FLUID

Refer to the scheduled maintenance information for the service

interval schedules.

1. Start the engine and let it run

until it reaches normal operating

temperature (the engine coolant

temperature gauge indicator will be

near the center of the normal area

between H and C).

2. While the engine idles, turn the

steering wheel left and right several

times.

3. Turn the engine off.

4. Check the fluid level in the reservoir. It should be between the MIN

and MAX lines. Do not add fluid if the level is in this range.

5. If the fluid is low, add fluid in small amounts, continuously checking

the level until it reaches the range between the MIN and MAX lines. Be

sure to put the cap back on the reservoir. Refer to Maintenance

product specifications and capacities in this chapter for the proper

fluid type.

BRAKE FLUID

The fluid level will drop slowly as

the brakes wear, and will rise when

the brake components are replaced.

Fluid levels between the “MIN” and

“MAX” lines are within the normal

operating range; there is no need to

add fluid. If the fluid levels are

outside of the normal operating

range the performance of the

system could be compromised; seek

service from your authorized dealer

immediately.

2009 MKZ (378)

Owners Guide

USA (fus)

Maintenance and Specifications

275

1 2 ... 270 271 272 273 274 275 276 277 278 279 280 ... 291 292

No comments

Lincoln 2009 MKZ User Manual Page 275