Lincoln 2011 Town Car User Manual download pdf (Page 212)

considered normal and will not affect function or durability of the

transmission. Over time, the adaptive learning process will fully update

transmission operation.

1. Use only a 12–volt supply to start your vehicle.

2. Do not disconnect the battery of the disabled vehicle as this could

damage the vehicle’s electrical system.

3. Park the booster vehicle close to the hood of the disabled vehicle

making sure the two vehicles do not touch. Set the parking brake on

both vehicles and stay clear of the engine cooling fan and other moving

parts.

4. Check all battery terminals and remove any excessive corrosion before

you attach the battery cables. Ensure that vent caps are tight and level.

5. Turn the heater fan on in both vehicles to protect from any electrical

surges. Turn all other accessories off.

Connecting the jumper cables

Note: In the illustration, the vehicle on the bottom is used to designate

the assisting (boosting) battery.

1. Connect the positive (+) jumper

cable to the positive (+) terminal of

the discharged battery.

2. Connect the other end of the

positive (+) cable to the positive

(+) terminal of the assisting battery.

3. Connect the negative (-) cable to

the negative (-) terminal of the

assisting battery.

4. Make the final connection of the

negative (-) cable to an exposed

metal part of the stalled vehicle’s

engine, away from the battery and

the carburetor/fuel injection system.

Note: Do not attach the negative (-) cable to fuel lines, engine rocker

covers, the intake manifold or electrical components as grounding points.

–

Roadside Emergencies

212

2011 Town Car (tow)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 307 308

No comments

Lincoln 2011 Town Car User Manual Page 212