Lincoln 1998 Continental User Manual download pdf (Page 53)

and gates, and can also control home or office lighting and security

systems (with the available accessory package).

When programming your HomeLinkt Universal Transmitter, you

will be operating the garage door or gate. Be sure that people

and objects are out to the way to prevent potential harm or damage.

Do not use the HomeLinkt Universal Transmitter with any garage door

opener that lacks safety stop and reverse features as required by U.S.

federal safety standards (this includes any garage door opener model

manufactured before April 1, 1982). A garage door which cannot detect

an object, signaling the door to stop and reverse, does not meet current

U.S. federal safety standards. For more information on this matter, call

toll-free: 1–800–355–3515.

Programming

1. Prepare for programming the

HomeLinkt Universal Transmitter by

erasing all three of the factory

default channels by holding down

the two outside controls until the

red light begins to flash (20-30

seconds). Release both controls.

2. Hold the end of your hand-held

transmitter against the HomeLinkt

Universal Transmitter (located on

your visor) while keeping the red light in view.

3. Using both hands, press the

hand-held transmitter control and

the desired channel control on the

HomeLinkt Universal Transmitter.

Do not release the controls until

step 4 has been completed.

4. Hold down both controls until the

red light begins to flash slowly and

then rapidly. Rapid flashing indicates

successful programming of the new

frequency signal.

5. Follow steps 2 through 4 to program the remaining two channels.

Controls and features

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 175 176

No comments

Lincoln 1998 Continental User Manual Page 53